Month: June 2016

Throwback weekends

I must be getting old because the last few events that we’ve attended have been “throwbacks” but that is referring to popular people (actors, musicians) from the 90s and that really wasn’t that long ago.  Maybe I’m dating myself a bit.

Two weekends ago the wife and I headed to downtown Sac to grab some dinner.  While looking for parking we passed the Memorial Auditorium and saw a number of tents set up in front of the venue.  The signs on the tents read: V101 FM, 107.9, and 102.5 FM.  These are local stations hip hop, R&B, and Today’s hits.  Our interests were piqued so after sitting at the restaurant, I looked up who was playing that evening.  Turns out it was a stand up show with Chris Tucker.  I’ve been a fan of him for many years – both film and stand-up shows.  I’ve never seen him live and so the wife convinced me that we should walk over and see if they had tickets still (even though the show was starting).  YOLO right?  Lo and behold the wife procured some tickets and we found our way to the seats.

IMAG2888

We were about 30 minutes past the start time but it was perfect timing.  As we sat, the opening act was signing off.  Within 5 minutes of sitting, Chris Tucker was on the stage.  I’ve been a fan of Chris Tucker in movies such as Friday, Rush Hour (series), The Fifth Element, etc.

Overall he performed for about 1.5 hours and was pretty funny.  There were a few jokes sprinkled in his performance that were recycled from previous stand ups that I’ve seen on Netflix and such.  He also gave props a few times to some recently deceased artists like Prince, Muhammad Ali, and the not so recently passed Michael Jackson.  It turned out to be a fun night and I’m glad for the spontaneity.

Then this past weekend my coworker kindly gifted us tickets to the V101 Summer Jam at Thunder Valley Resort & Casino (about an hour’s away from us).  We had gone to last year’s show and were excited for this year as well.

IMAG2890

The lineup this year included: Doug E. Fresh, Slick Rick, SWV, K-Ci & JoJo, and Keith Sweat.  These artists are people who I listened to a fair amount through the 90s and into the early 2000s as well.  Compared to last year’s lineup (Bel Biv Devoe, Blackstreet w/ Teddy Riley & David Hollister, and Naughty By Nature), this year’s group of performers were more R&B and less fast-paced.  I think that definitely affected the crowd as it seemed more mellow this year than last year.  However it was still a great show.  V101 is the local “throwback” radio station that plays a lot of hip hop and R&B from the 90s and is a mainstay in my car.  They also have an exciting Block Party concert coming up this fall that we’re thinking about attending.

Due to my phone not taking the greatest pictures I have attached some but they’re not the best.

IMAG2909 IMAG2911 IMAG2914 IMAG2915

-StewsCat

Sourdough wheat sandwich bread

Quick bread update.  I decided to use more of my sourdough starter to make this week’s 50% whole wheat sandwich bread.  This week I essentially used the same recipe as last week’s but with the addition of the sourdough.

Recipe:

  • 80g sourdough starter (100% hydration)
  • 300g 100% whole wheat flour
  • 255g bread flour
  • 145g rice milk
  • 260g water
  • 18g salt
  • 35g honey
  • 1/4 c. vegetable oil
  • 5g yeast (cut down the yeast to see if the starter has some oomph to create rise)

I combined all the above ingredients into one giant slurry and let it auto-lyse for 30 minutes.  I am always amazed how the dough goes from a ragged mess to a cohesive and firm dough.

After mixing
After slap & fold kneading
After bulk fermentation

I did the slap & fold kneading for 15 minutes.  Each time I do this, I get better and better at sensing/feeling the dough coming together and becoming less sticky.  The first time I did this, I had no idea how long I was supposed to knead for and ended up doing the slap & fold for almost an hour.

After I finished the slap & folds, I put the dough in a clean bowl and let it bulk ferment for an hour.  As seen above, the dough really formed up very nicely.  Following bulk fermentation, I dumped the dough out on my lightly floured countertop and performed a stretch and fold (envelope style) and placed the dough back in the bowl for 20 minutes.  Once more I did a stretch and fold followed by the initial shaping.  This involved de-gassing the dough and creating a square shape.  I then folded the dough down from the top to the middle of the dough and pressed this down.  Subsequently I pulled the dough once more to me and pressed down to seal it (essentially creating a log shape).  I then bench rested the dough for 5 minutes and then re-shaped into loaf shape.  The dough was then placed in a well-greased (butter) 9″ x  5″ loaf pan.

I allowed the dough to proof for about 45 minutes (the kitchen was warm because I was also making pizza).  As with last week, the dough had risen really well.  I did the finger poke test and noted the dough was well proofed.

The bread went into a 425 F oven with water spraying.  I let it bake at this temperature for 10 minutes.  I dropped the oven to 375 F and baked the bread for another 25 minutes.  By this time, the top of the loaf was a nice dark brown color and the internal temp 187.7 F.  I read that enriched bread (which this is) is done between 185-190 F and you can let it go until 205 F if you want a really crunchy crust.  This time I decided to remove it a littler earlier to see what kind of difference it would make (last week’s was around 195 F).

After slicing, I noted that the bread was just slightly underdone.  If you look at the cross-sectional view of the crumb, you’ll notice at the bottom part of the bread, the crumb is a bit collapsed and not well-aerated like the rest of the bread.  Next time I’ll probably try to get it closer to 190 F internal temperature.

IMAG2933
Slightly underdone

This bread turned out good, still a little weaker than I’d like for a sandwich bread.  I wonder if I toasted it before making my sandwich if it would hold up a little better.  The wife said that it is softer than last week’s effort.

In other news, we were able to top our pizza with some homegrown arugula.  We decided to try some lettuces this year in our raised vegetable beds.  This was a first and out of the 4, the arugula is the only one that grew well.  There was a different lettuce that initially grew well then one day was all gone.  I am suspicious the local wild turkey came over and chomped it all away.

IMAG2924
Homegrown arugula

-StewsCat

Sourdough baguettes

Sourdough baguettes

In a yet to be published post, I am currently creating my own sourdough starter.  I felt bad discarding 1/2-2/3 of the starter everyday so started looking up recipes on what I could do with that discarded starter.  One thing people recommended was using it for the taste (“sour”) component prior to it being strong enough to act as yeast.  Therefore you still had to use some yeast (active dry in  my case) to help the dough rise.

So I decided to try my hand at baguettes.  I have not attempted this type/shape of dough yet so this was more an experiment than anything.

I found this recipe online and decided to run with it.

  • Flour 100%
  • Water 66%
  • Salt 2%
  • Instant yeast 0.36%
  • Poolish: 33% of the above total.

Poolish (done the night before and allowed to sit overnight at room temp):

  • 60g Sourdough starter (100% hydration)
  • 103g AP flour
  • 58g Room temperature water
IMAG2891
Poolish made the night before

In the morning the poolish had spread out and developed the requisite bubbles to let me know it was working well.

IMAG2892
Poolish in the AM (~12 hours later)

To the poolish I added:

  • 267g AP flour
  • 176g water
  • 8g salt
  • ~1.5g Active-dry yeast

I mixed the above with the poolish until it was well incorporated and let it auto-lyse for an hour.

IMAG2893
Mixed dough after auto-lyse

I followed this with slap&fold kneading for about 15 minutes until I obtained a nice formed dough.  I let this bulk ferment for another hour and then did 2 stretch and folds separated by 20 minutes.

I divided the dough up into the individual baguette sizes and bench rested them for 15 minutes.

IMAG2894
Bench resting

Then I set about shaping the dough.  I followed the video as seen here.   I definitely need to practice rolling out the dough to get an even product.  As you can see below in the final pictures, the baguettes came out a little lopsided.

I don’t currently have a baguette bouche so looked up ways to create a homemade one.  What I ended up using was a sheet pan, parchment paper and rolled up table placemats.

IMAG2897
Homemade couche

I let these proof for 40 minutes and then turned them out onto my baking system (upside down sheet pan with parchment paper).  Other options I read include transfer to a pizza peel and putting on pizza stone in oven (I can see myself messing this up) or if you have the metal couche, you can bake directly in those.  I scored the baguettes with a sharp razor and did a terrible job of it (I also read that scoring is one of the hardest skills to master).

IMAG2898
Uneven scoring

I placed the baguettes in a 450 F oven, sprayed the inside with my trusty water spray bottle and closed the door.  I sprayed the oven walls/bread again at 1 minute and 5 minutes in.  After 6 minutes I dropped the oven to 400 F.

IMAG2899
Good oven spring

I wasn’t sure exactly how long to bake it for as some recipes I read said 12 minutes while others said 24 minutes.  I ended up going closer to the 24 minutes.  The baguettes never developed the deep brown color I was looking for but they were definitely cooked and done.  The wife noted the crust was a bit hard – though from what I read of classic baguettes they are supposed to have a very crispy outside.  All in all not a bad effort for a first try.

There was a mild sour taste to it so I may have to increase the amount of starter that I use to get the taste that my wife likes.

-StewsCat

50% Whole wheat sandwich bread

50% Whole wheat sandwich bread

Since we’ve been suffering from triple digit heat the last week, I wasn’t planning on making bread this week (hot oven just makes the kitchen that much hotter, especially because we don’t actually have an A/C register in the kitchen – I blame the previous homeowner).  However, the wife asked for bread (and/or tortillas) for the week for lunches and of course I obliged with both.  I decided I was going to try a 50% whole wheat sandwich loaf baked in my 9″ x  5″ bread pan.  I started this whole recipe fairly late in the day (around 2 pm Sunday) and with no poolish.  I also did not follow a specific recipe this time.

I did read up on the things you should do when using a whole wheat (whole grain) flour.  The extra outer layer on whole grains basically acts like razor blades when you’re trying to develop gluten.  I elected to do a 50:50 mixture of whole wheat flour and bread flour because bread flour has a higher gluten content and should allow for good rises/proofing.  And while maybe not technically healthy, having 50% whole wheat is healthier than pure white bread.  Other tips I read were to make sure that you included some fats (oil) to help with dough texture.  I incorporated some honey to help with taste.

50% Whole wheat sandwich bread recipe:

  • 300g – 100% Whole wheat bread flour
  • 300g – Bread flour
  • 145g – Rice milk
  • 305g – Water
  • 18g – Salt
  • 35g – Honey
  • 1/4 c. – Vegetable oil
  • 10g – Active dry yeast

I mixed up all the above ingredients and let the well-incorporated mixture rest for 30 minutes to allow the flour to absorb all the water.  I then proceeded to knead the dough for about 14 minutes using the Richard Bertinet slap & fold method.  I could really feel the dough developing good structure this time (before I used to just keep slapping and folding forever not entirely sure that it was developing the gluten structure that I needed).  I know because of the whole wheat and its tiny razor blades I needed to make sure the dough was well kneaded.  After kneading, I allowed the dough to rest in a large bowl for the bulk fermentation.  Bulk fermentation can go anywhere from 1-2 hours depending on temperature.  With the aforementioned heatwave we’ve been experiencing, the inside of the house has been around 81-83 so I knew that rises and proofs most likely would be shorter than I expected.

After about 50 minutes I checked on the dough and it had more than doubled in size (~2.5x original).  I poured the dough out carefully on a lightly floured countertop and did a stretch and fold a few times.  I replaced the dough into the bowl and allowed it to sit for 25 minutes.

IMAG2862
Beautifully formed  dough

The dough had come together nicely (and was not the sloppy wet mess that was my previous attempt at whole wheat bread).   I did the envelope fold which helps de-gas the dough somewhat.  This was followed by a 10 minute bench rest.

IMAG2863
Bench rest

I then formed the dough into the proper shape for the bread pan, ensuring I created a nicely tensioned top portion.

IMAG2864
Shaped for the bread pan (9″ x 5″)

I lightly floured the top of the dough and covered it with a lightweight cloth to proof.  I set the timer for 60 minutes but started checking the dough after about 30 minutes (due to the heat of the kitchen).  I also pre-heated the oven to 425F.  The way to check whether a bread has proofed properly, at least from what I’ve read thus far, is to take a lightly floured finger, press the dough down and see what happens.  If it stays down, it has over-proofed, if it bounces back fully it isn’t ready yet (under-proof) and when it bounces back halfway, then it’s proofed.

Muffin top
Nicely proofed

I wanted to create that “muffin-top” like look for the bread, the same look you get from store-bought sliced bread.  I had to look up the dough size I needed to create this, since my 9″ x  5″ bread pan is larger than the standard size.  From my research, I came up with a dough around 850-900 grams.  As you can see above, I achieved that look I was going for. I had recently ordered some spray bottles so I could spray the oven/bread as it went into the oven to create that nice top crust.  I popped the bread pan into the oven, sprayed it and shut the door quickly in my 425F oven.  After about 15 minutes, I dropped the temperature to 375 F and sprayed it once more time.  A total of 40 minutes baking created the perfect color and doneness (I checked the internal temp which read around 197F).

Nice firm crust that sounds hollow when knocked
Good muffin top appearance

Since I’m not planning on cutting it until tomorrow when I make my work for lunch, you’ll just have to check back later to see how the crumb and taste turned out.  Enjoy!

-StewsCat